Winter Pack
Edit on GitHubPacking the beacon for winter: the cold-specific additions, the battery strategy, and the checks that winter demands.
Winter Pack
Winter multiplies every beacon risk: batteries sag, seals stiffen, snow blocks antennas, and hypothermia shortens the response window. This page is the winter pack.
The winter additions
| Item | Why |
|---|---|
| Two spare cells, inside pockets | Cold kills capacity (see Cold Weather Batteries) |
| Heated cell pouch or body placement | The cell must stay warm to deliver TX current |
| Glove-compatible antenna mount | Antennas snap in the cold |
| Signal mirror and whistle | Cold weather often means clear skies: daylight signaling works |
| Thermal blanket in the beacon pouch | The beacon pouch doubles as the survival kit (see Emergency Kit) |
The battery strategy
- Cell A: in the beacon, insulated.
- Cell B: inside jacket, body heat.
- Swap at the first sign of TX sag, not at the first low reading (see Battery Field Swap).
The snow antenna problem
Snow on the antenna adds loss and can detune it (see Snow and Signal Behavior). A quick wipe before an important burst helps; mounting the antenna clear of the pack’s snow collection points helps more.
The winter checks
- Seals: cold rubber seals stiffen; check the case seal closes fully (see Waterproofing).
- The 45-minute rule: in deep cold, check the beacon’s operation (a test burst) within 45 minutes of departure, not at the summit.
- The Pack Check Routine runs twice: at home and at the trailhead.
Related pages
- Winter Operations for the full winter playbook
- Cold Weather Batteries for the cells
- Avalanche Rescue Operation for the snow context